Grattoirs and scrappers

Metal Grattoirs or Scrappers,

Fine Tooth = 10 spaces in 3 mm (10 spaces in 1 3/16th inch)
(textured stainless steel)28.00

Medium Tooth= 5 spaces in 3 mm (5 spaces in 1 3/16th inch)
(polished stainless steel) 26.00
Large Grattoir
is 5.5 mm (2 3/16th inch) across at its
widest point. It tapers for ease of holding. Length is 7.5 mm (2
15/16th inch).

Large Tooth =
5 spaces in 5.5 mm (5 spaces in 2 3/16th
inch). Small $20 retail plus
shipping and handling Large $40 retail

Description

     Metal Grattoirs and/ or  Scrappers

Grattoirs  or Scrappers are the French version of the comb used to push the weft into
position for tapestry. A Grattoir will place the weft with enough slack
(bubble) that it will easily cover the warp. It is used in conjunction
with the beater, not to replace it. We have found a talented machinist
to make these Grattoirs for us out of stainless steel. We have them
available in two sizes, three tooth spacing’s and two surface finishes.
  Each size and tooth can be ordered in either finish, but you must allow (at this time we only have the smooth)

Small Grattoir 1 an 3/16th inches across at its widest point. It tapers for ease of holding. Length is 2 inches and 5/16th inches.

Fine Tooth = 10 spaces in 3 mm (10 spaces in 1 3/16th inch)
(textured stainless steel) 28.00

Medium Tooth= 5 spaces in 3 mm (5 spaces in 1 3/16th inch)
(polished stainless steel) 26.00
Large Grattoir
is 5.5 mm (2 3/16th inch) across at its
widest point. It tapers for ease of holding. Length is 7.5 mm (2
15/16th inch).

Large Tooth =
5 spaces in 5.5 mm (5 spaces in 2 3/16th
inch). Small $20 retail plus
shipping and handling Large $40 retail

No wholesale at this time.

Reviews

There are no reviews yet.

Be the first to review “Grattoirs and scrappers”

Your email address will not be published. Required fields are marked *